Description:
The Active Autowerke N52 Performance Exhaust Header is specifically designed for BMW chassis which utilize the N52 inline 6-cylinder engine. With our performance header for the N52, you will be able to increase the exhaust flow of your BMW while gaining additional power u2013 something that is difficult to accomplish on these vehicles.
This header was engineered to promote optimum flow and eliminate any restrictions that could possibly rob the engine of extra horsepower. Available for a number of BMW applications, the Active Autowerke N52 Performance Exhaust Header should be one of the first upgrades owners elect to make. Not to mention, the tremendous effects can be felt almost immediately.
Key Features:
- Dyno-Proven 20+ WHP gains over stock manifold
- Improved power & torque curves throughout entire RPM range
- Available for Coupe, Convertible, & Sedan
- Designed for RACE and/or TRACK USE
- 100% 304 Brushed Stainless Steel finish
- Mandrel-bent tubing for a smooth & unrestricted flow
- Each header test fitted on N52 Header jig
- Guaranteed to fit on BMW E9X 328i w/N52 engine
- Includes all gaskets needed for installation ( $150 SAVINGS )
- Two-year Limited Warranty
N52 EXHAUST HEADER APPLICATIONS:
E82:
- 128i Coupe or Convertible
E9X:
- 325i/325xi Sedan, Coupe, or Convertible
- 328i/328xi Sedan, Coupe, or Convertible
- 330i/330xi Sedan, Couple, or Convertible
- WILL NOT FIT RHD CARS
MODIFICATIONS:
- Active Autowerke N52 Performance Exhaust Header
- 3 Stage intake manifold (charcoal air filter removed)
- K&N Drop-in filteru00a0
- Stock exhaust (with secondary catalytic converters intact)
NOTE:
- Header system designed for off-road use and racing application only
- Will generate **CEL** withoutActive Autowerke N52 software upgrade
Mustang Dyno Results - BMW 328i Auto:
u00a0
MODIFICATIONS:u00a0
- Active Autowerke Performance Exhaust Header
- Stock intake manifold (charcoal filter removed)
- OEM paper air intake filter
- Stock exhaust (with secondary catalytic converters intact)
RESULTS:u00a0
Bottom line - stock 328i Automatic: u00a0175 WHP|161 WTQ
Middle line - AA Header & charcoal filter delete: u00a0198 WHP|179 WTQ
Top line - AA header, AA software, & charcoal filter delete: u00a0207 WHP|192 WTQ
u00a0u00a0
Created With Performance In Mind
As is the goal with building any header, the purpose of designing the N52 Performance Header was increase horsepower and improve overall performance. Our header does a tremendous job of freeing up untapped horsepower that the BMW N52 is capable of producing. After many dyno runs and recorded results, the data validates the Active Autowerke N52 Performance Header as must-have BMW performance part for a noticeable and powerful upgrade.
Material & Durability
Suitable for either naturally aspirated or supercharged applications, the N52 Header by Active Autowerke is made entirely of 100% 304 stainless steel. With this header, worrying about durability is a thing of the past.
Installation
Is installing the header difficult to do? Not at all! Robust exhaust flanges with recessed mounting holes make the installation of your N52 Performance Header a breeze. With a few quick turns of a ratchet, you will be well on your way to feeling the additional horsepower.
NOTE:u00a0Active Autowerke GUARANTEES that each and every N52 Performance Header will be a precise fit. Every Active Autowerke N52 Header is test-fitted on our N52 motor jig as part of our quality control.
Hardware:
As far as mounting hardware is concerned, this system is absolutely complete. The BMW N52 engine uses a single-use oval shape gasket to help seal the exhaust manifold against the exhaust port u2013 a floating design that also self-centers the exhaust flange as it is being torqued. Reuse of this gasket is NOT SUGGESTED which is why we provide you with SIX new gaskets as part of the installation hardware.
Also included are two fiber gaskets for where the header meets the remaining sections of the exhaust system. Copper locking nuts for the header to mount against the cylinder head and mounting bolts w/nuts to secure the header to the exhaust system are included as well.u00a0
NOTE:u00a0The factory exhaust catalysts MUST be removed in the process, making this solution recommended for off-road and racing applications ONLY.There will be a CEL without Active Autowerke software upgrade
The Active Autowerke N52 Performance Exhaust Header is specifically designed for BMW chassis which utilize the N52 inline 6-cylinder engine. With our performance header for the N52, you will be able to increase the exhaust flow of your BMW while gaining additional power u2013 something that is difficult to accomplish on these vehicles.
This header was engineered to promote optimum flow and eliminate any restrictions that could possibly rob the engine of extra horsepower. Available for a number of BMW applications, the Active Autowerke N52 Performance Exhaust Header should be one of the first upgrades owners elect to make. Not to mention, the tremendous effects can be felt almost immediately.
Key Features:
- Dyno-Proven 20+ WHP gains over stock manifold
- Improved power & torque curves throughout entire RPM range
- Available for Coupe, Convertible, & Sedan
- Designed for RACE and/or TRACK USE
- 100% 304 Brushed Stainless Steel finish
- Mandrel-bent tubing for a smooth & unrestricted flow
- Each header test fitted on N52 Header jig
- Guaranteed to fit on BMW E9X 328i w/N52 engine
- Includes all gaskets needed for installation ( $150 SAVINGS )
- Two-year Limited Warranty
N52 EXHAUST HEADER APPLICATIONS:
E82:
- 128i Coupe or Convertible
E9X:
- 325i/325xi Sedan, Coupe, or Convertible
- 328i/328xi Sedan, Coupe, or Convertible
- 330i/330xi Sedan, Couple, or Convertible
- WILL NOT FIT RHD CARS
MODIFICATIONS:
- Active Autowerke N52 Performance Exhaust Header
- 3 Stage intake manifold (charcoal air filter removed)
- K&N Drop-in filteru00a0
- Stock exhaust (with secondary catalytic converters intact)
NOTE:
- Header system designed for off-road use and racing application only
- Will generate **CEL** withoutActive Autowerke N52 software upgrade
Mustang Dyno Results - BMW 328i Auto:
u00a0
MODIFICATIONS:u00a0
- Active Autowerke Performance Exhaust Header
- Stock intake manifold (charcoal filter removed)
- OEM paper air intake filter
- Stock exhaust (with secondary catalytic converters intact)
RESULTS:u00a0
Bottom line - stock 328i Automatic: u00a0175 WHP|161 WTQ
Middle line - AA Header & charcoal filter delete: u00a0198 WHP|179 WTQ
Top line - AA header, AA software, & charcoal filter delete: u00a0207 WHP|192 WTQ
u00a0u00a0
Created With Performance In Mind
As is the goal with building any header, the purpose of designing the N52 Performance Header was increase horsepower and improve overall performance. Our header does a tremendous job of freeing up untapped horsepower that the BMW N52 is capable of producing. After many dyno runs and recorded results, the data validates the Active Autowerke N52 Performance Header as must-have BMW performance part for a noticeable and powerful upgrade.
Material & Durability
Suitable for either naturally aspirated or supercharged applications, the N52 Header by Active Autowerke is made entirely of 100% 304 stainless steel. With this header, worrying about durability is a thing of the past.
Installation
Is installing the header difficult to do? Not at all! Robust exhaust flanges with recessed mounting holes make the installation of your N52 Performance Header a breeze. With a few quick turns of a ratchet, you will be well on your way to feeling the additional horsepower.
NOTE:u00a0Active Autowerke GUARANTEES that each and every N52 Performance Header will be a precise fit. Every Active Autowerke N52 Header is test-fitted on our N52 motor jig as part of our quality control.
Hardware:
As far as mounting hardware is concerned, this system is absolutely complete. The BMW N52 engine uses a single-use oval shape gasket to help seal the exhaust manifold against the exhaust port u2013 a floating design that also self-centers the exhaust flange as it is being torqued. Reuse of this gasket is NOT SUGGESTED which is why we provide you with SIX new gaskets as part of the installation hardware.
Also included are two fiber gaskets for where the header meets the remaining sections of the exhaust system. Copper locking nuts for the header to mount against the cylinder head and mounting bolts w/nuts to secure the header to the exhaust system are included as well.u00a0
NOTE:u00a0The factory exhaust catalysts MUST be removed in the process, making this solution recommended for off-road and racing applications ONLY.There will be a CEL without Active Autowerke software upgrade
The Active Autowerke N52 Performance Exhaust Header is specifically designed for BMW chassis which utilize the N52 inline 6-cylinder engine. With our performance header for the N52, you will be able to increase the exhaust flow of your BMW while gaining additional power u2013 something that is difficult to accomplish on these vehicles.
This header was engineered to promote optimum flow and eliminate any restrictions that could possibly rob the engine of extra horsepower. Available for a number of BMW applications, the Active Autowerke N52 Performance Exhaust Header should be one of the first upgrades owners elect to make. Not to mention, the tremendous effects can be felt almost immediately.
Key Features:
- Dyno-Proven 20+ WHP gains over stock manifold
- Improved power & torque curves throughout entire RPM range
- Available for Coupe, Convertible, & Sedan
- Designed for RACE and/or TRACK USE
- 100% 304 Brushed Stainless Steel finish
- Mandrel-bent tubing for a smooth & unrestricted flow
- Each header test fitted on N52 Header jig
- Guaranteed to fit on BMW E9X 328i w/N52 engine
- Includes all gaskets needed for installation ( $150 SAVINGS )
- Two-year Limited Warranty
N52 EXHAUST HEADER APPLICATIONS:
E82:
- 128i Coupe or Convertible
E9X:
- 325i/325xi Sedan, Coupe, or Convertible
- 328i/328xi Sedan, Coupe, or Convertible
- 330i/330xi Sedan, Couple, or Convertible
- WILL NOT FIT RHD CARS
MODIFICATIONS:
- Active Autowerke N52 Performance Exhaust Header
- 3 Stage intake manifold (charcoal air filter removed)
- K&N Drop-in filteru00a0
- Stock exhaust (with secondary catalytic converters intact)
NOTE:
- Header system designed for off-road use and racing application only
- Will generate **CEL** withoutActive Autowerke N52 software upgrade
Mustang Dyno Results - BMW 328i Auto:
u00a0
MODIFICATIONS:u00a0
- Active Autowerke Performance Exhaust Header
- Stock intake manifold (charcoal filter removed)
- OEM paper air intake filter
- Stock exhaust (with secondary catalytic converters intact)
RESULTS:u00a0
Bottom line - stock 328i Automatic: u00a0175 WHP|161 WTQ
Middle line - AA Header & charcoal filter delete: u00a0198 WHP|179 WTQ
Top line - AA header, AA software, & charcoal filter delete: u00a0207 WHP|192 WTQ
u00a0u00a0
Created With Performance In Mind
As is the goal with building any header, the purpose of designing the N52 Performance Header was increase horsepower and improve overall performance. Our header does a tremendous job of freeing up untapped horsepower that the BMW N52 is capable of producing. After many dyno runs and recorded results, the data validates the Active Autowerke N52 Performance Header as must-have BMW performance part for a noticeable and powerful upgrade.
Material & Durability
Suitable for either naturally aspirated or supercharged applications, the N52 Header by Active Autowerke is made entirely of 100% 304 stainless steel. With this header, worrying about durability is a thing of the past.
Installation
Is installing the header difficult to do? Not at all! Robust exhaust flanges with recessed mounting holes make the installation of your N52 Performance Header a breeze. With a few quick turns of a ratchet, you will be well on your way to feeling the additional horsepower.
NOTE:u00a0Active Autowerke GUARANTEES that each and every N52 Performance Header will be a precise fit. Every Active Autowerke N52 Header is test-fitted on our N52 motor jig as part of our quality control.
Hardware:
As far as mounting hardware is concerned, this system is absolutely complete. The BMW N52 engine uses a single-use oval shape gasket to help seal the exhaust manifold against the exhaust port u2013 a floating design that also self-centers the exhaust flange as it is being torqued. Reuse of this gasket is NOT SUGGESTED which is why we provide you with SIX new gaskets as part of the installation hardware.
Also included are two fiber gaskets for where the header meets the remaining sections of the exhaust system. Copper locking nuts for the header to mount against the cylinder head and mounting bolts w/nuts to secure the header to the exhaust system are included as well.u00a0
NOTE:u00a0The factory exhaust catalysts MUST be removed in the process, making this solution recommended for off-road and racing applications ONLY.There will be a CEL without Active Autowerke software upgrade
Active Autowerke BMW M3 Supercharger Kit E46 Gen 9 Level 1
When you thought it could not get any better, and after 10 yrs. of the #1 selling E46 M3 SC kit, Active Autowerke is proud to announce there new Generation 9.5 SC kit. Active Autowerke is always looking for improvement, so it is no surprise that Active Autowerke has developed the 9th Generation E46 M3 SC Kit.
Reliability and power is needed if you want to be on the podium, and this new Generation 9 will deliver exactly that. Consistent, repeatable runs of over 415 WHP (525 engine horsepower) were also recorded on the Active Autowerke Mustang chassis dyno in hot 94 + degree Fahrenheit conditions with humidity in the 60% + range. These run conditions might be considered a deterrent and not really suited, but it is better knowing the horsepower numbers under such conditions, since higher horsepower numbers will only increase as the temperature falls and the air becomes more dense. Make sure to employ a proper BMW M3 Signature Exhaust for maximum power output!
Performance Specs:
- Power525 BHP @ 7650 rpm
- Torque335 ft/lbs @ 5400 rpm
- Boost Level7-8 psi
Key Features:
- Rotrex 92 Trim Supercharger
- High Adiabatic Efficiency
- Active Autowerke Generation 7 Intake Manifold w/ Dual By Pass Valve
- Front Mount Air to Air Intercooler
- Larger Fuel Injectors
- Supercharger Oil Cooler
- Colder Heat Range Spark Plugs
- High Performance AA Spec Green Filter
- Active Autowerke High Performance Software
- All Mounting Hardware, plumbing, hoses and clamps
- Proven Horsepower gains even under extreme conditions
- Installation Instructions included
- 1 Year Limited Warranty
Please Note All Supercharge Kits May Take Up To 6 Weeks To Ship due to Blower availability. Please Call To Confirm.
(0 ) Reviews:
No reviews yet. Be the first to review!